Fiat 500 Key Fob Replacement
If your 500 keyfob stops working, use another one to determine if it will be recognized by the car. If it does, then it could be a problem due to the battery or water damage to the fob that was originally used.
First, replace the battery. The "+" side should be facing down.
Dead Battery
The battery is usually the reason behind a fob not working. It's easy to fix, and most fobs warn you when the battery is low. There are instructions for the majority of car key fobs on YouTube or in your owner's guide. You can also change it by taking it to an authorized locksmith or a dealer who sold it to you.
Sometimes, a fob will cease to function, and it could be a problem with the internal circuit board. It is rare, but it does happen. If you dropped the fob on a hard object, it may damage the internal chip. It can also happen if you use an aftermarket fob and the key does not work. In this instance, you will need to go to a dealer or a locksmith and have it reprogrammed to work with your 500.
One 2012 FIAT 500 Flip Key Remote - Look-alike Ilco brand with trunk, lock and lock buttons. New replacement keyless entry remote (will need to be cut & programmed by a locksmith)
Damaged Chip
Fiat 500 key fobs are wireless devices that send signals to the car whenever you press the button. It's equipped with a microchip, which contains the code that will allow it to communicate with the car. If the chip is damaged it will not transmit the correct code, and the car won't begin. A locksmith can repair the damage. United Locksmith can complete this repair on both traditional and modern models, so do not hesitate to call us.
A locksmith can program an entirely new key fob. It is cheaper to do this rather than going to the dealer, and it works just as well. A locksmith will require specific details from you, like the year that your car was made and the name of its model.
Rub the chip with an old dollar bill if not sure what to do. The copper in the bill is abrasive enough to remove dirt and oxidation, but it will not cause any damage to the microchip. The chip may not be repaired in the event that it has been physically damaged. This can happen when you drop it or run it over by your vehicle.
fiat punto key fob replacement
If you've accidentally dropped your keys in the pool, put them in your bag while swimming at the beach, or splashed them with water on a rainy afternoon It's likely that your fob will have some water damage. Even if there's only the smallest amount of water on the key, it can cause major problems for its electronics.
The good news is that you can often solve this problem by removing the fob's key and then using paper towels to rid it of any remaining dirt or water. Once the fob is dry and clean, you can replace its battery and it will begin working normally.
You can also take your fob to a local locksmith shop or auto shop to have it professionally cleaned and programmed. These professionals will use special equipment to make sure that the fob's key works with your car's computer.
When the key fob on your Fiat 500 stops working, you may be frustrated and overwhelmed. It can be costly and inconvenient to take your key fob to a dealer. Locksmiths can handle all aspect of your car's key fob replacement without the need for a dealership visit. They are a better choice than an auto dealer.
Pairing Issues
If you lose your keyfob or it stops functioning and nothing else seems to be wrong, it may be the chip. This could be due water damage, a dead battery or it could be that it needs reprogramming.
In most cases, this can be done by following the steps in your owner's manual. However it's a good idea to have an automotive locksmith perform this procedure if you're having difficulties or the steps in your manual don't work for you. This will ensure that the chip is not damaged, and it's the cheapest alternative.
500 owners have reported that their keys do not lock their vehicles. This could be a major issue if you're at an gas station to fill up. Some owners have complained that the locking system of their 500 failed and they've had to replace the entire intermediate steering shaft. This issue was reported in a technical service bulletin (TSB) from Fiat.
A reputable locksmith can assist you if your Fiat is having problems. They can duplicate your key or they can make you new keys that unlock and start your car. They are able to do this without looking at your old key, and is usually cheaper than buying one from a dealer.